Mr Afogassa, I am impressed with this project, and would like to undertake it...however I fear that my technical skills are not up to it. I am a Mechanical...
... Sandcasting for Al is pretty straight forward. You must be aware that the pattern (which the RP made) needs to have "draft and no "undercuts", but that is...
David G. LeVine
dlevine144@...
Jul 22, 2008 6:53 pm
95521
... dont mind. ... dismantle ... controlling ... It works just like a regular printer, the magic is done on the software, it slices the .stl and sends to the...
... it...however I fear that my technical skills are not up to it. I am a Mechanical Engineer, so the mechanical end should be no problem, I also have CAD...
Hi All, since this is a little off topic we've started a new group just for the 3d printer.there is nothing there yet I'll update the file section as my spare...
Using Alumilite or Smoothon 2 part RTV Silicone will easily give you a nice mold, and is pretty gentle on your original, and you can then cast in resin or a...
I have been asked to look at a DWC90 EDM machine. It has a paper tape drive and I have all the correct tapes. I know the tapes work since we have an identical...
The Zcorp machines infiltrate their 'Starch' parts with Cynacrylate and/or various epoxies and can achieve rigid of flexible parts. Maybe worth a look at ... ...
Wow, now thats a blast from the past. If g-code wasn't primitive enough, you've got it on paper tape ;) . Sounds to me like you have the first step to solving...
... Ugh! What computer is this run by? Do you have a mainteneance manual? The symptoms seem to be saying you have a fault condition in some part of the...
Hi to all, I added some more pictures to my Mill2lathe Project. I used a OPB704 Reflective sensor with CNC4pc C3 circuit board. Works good, you can see how it...
... tape ... since we ... power is ... 01000100. The ... followed by ... The computer is a W5F. I have an operating manual but no maintainance manual. Also no...
... machines before we converted all the machines over to pc-interface.Try to run the faulty reader on the good machine to confirm a reader problem and then...
I couldn´t enter to the page, It is has something wrong? ... De: afogassa <afogassa@...> Asunto: [CAD_CAM_EDM_DRO] 3d printer gets it's own group Para:...
My apologies. There was a slight name change to encompass as many technologies as possible on directly producing a 3D part through printing and other...
Has Rutex come back to life? I received a note from Vladimir and their web pages hows inventory available on all the 2000 series drives. Are these drives the...
... Umm, yes, apparently. But, you might want to get an independant opinion of any of their hardware before you go and spend money there. I don't know how...
I just acquired 4 Mannesmann Talley 57SHM-46BAB Steppers and recieved limited information on them. What I got was the following: 17.5 Ohm coil, 1.8 degrees...
... BAD news! These are VERY high resistance steppers. If they are reasonably large, like size 34, they are practically useless. If very small, they are at...
This list is for the discussion of CNC and related topics including CAD, CAM, EDM, & DRO. The list focuses on the construction of home shop CNC machines along...
CAD_CAM_EDM_DRO@yahoo...
Aug 1, 2008 9:26 am
95540
I'd like to know if anyone here has ever come across the Emco Basic Cad/Cam software that was included with the Compact 5 CNC lathe and F1 mill way back in the...
Hi, take a look on "youtube" i think i saw some stuff there on Emco basic...cul brian f. www.genapro.com ... From: "toymaker10" <terrydoucet@...> To:...
Brian, I've Googled "Emco Basic" for a few days and nothing turned up other than a lot of Emco stuff. Also I checked YouTube and again lots of Emco stuff but...
well, this site i stumbled onto the guy explained quite a bit about the emco basic system.....i run Mach3 here....so emco basic is pretty much out of my ...
Brian In an old CD box I have found a disc supplied to me by the late Peter Patient, the label refers to a URL of www.welsoft.co.uk <http://www.welsoft.co.uk/>...
Brian do you think you could locate that site again? Does it have video where he explains the software? I have come across Andrew Manus' web site. He sells...
Anyone familiar with Alliant mills? I'm planning to look at an Alliant 10x54 mill (approx late 90's vintage) with 3HP VS spindle and a Mitutoyo Millstar 3...
